Amiga Video Output & Upscaling Guide
RGBtoHDMI (Denise/Lisa + Pi Zero), Indivision ECS/AGA Mk3 internal flicker fixers, and external GBS-Control, OSSC & RetroTINK scalers.
1. RGBtoHDMI — Digital Pixel-Perfect HDMI via Pi Zero
Sampling the digital R/G/B/I signals directly off Denise or Lisa before analog conversion.
A500 / A500+ / A2000 (Denise DIP-48 Socket)
- How It Works: A CPLD interposer board sits between the motherboard's U4 socket and the 48-pin DIP Denise (8362 OCS) or Super Denise (8373 ECS), capturing the 12-bit digital RGBI video bus (pins 19–30) and 7/14/28 MHz pixel clocks directly into a Raspberry Pi Zero / Zero 2W.
- Extended 8373 Super Denise Adapter: Required if you want full ECS SuperHires (1280×256/512) and Productivity mode support alongside standard 320/640 lores/hires.
- Zero Analog Noise & Sub-Frame Latency: Because the analog video DAC/hybrid is bypassed completely, jailbars and chroma bleed are eliminated with <3 ms latency at locked 50.00 Hz PAL or 59.94 Hz NTSC.
A600 (PLCC-52) & A1200 (Lisa PLCC-84)
- A600 PLCC Clip-On Adapter: Clips upside-down onto the soldered PLCC-52 8373 Super Denise (U4). Clean the PLCC J-leads with 99% IPA so the spring pins make solid contact on all clock lines.
- A1200 AGA / Lisa Experimental Solutions: Because AGA's Lisa (CSG 4203, PLCC-84) outputs 24-bit digital RGB (R0–R7, G0–G7, B0–B7) plus 28 MHz clocks, standard 12-bit RGBtoHDMI CPLDs cannot capture all 24 bits without down-sampling or specialized FPGA/CPLD boards. For full 24-bit AGA fidelity on an A1200, Indivision AGA MK3 or PiStorm32-Lite RTG is typically preferred.
2. Indivision Internal Flicker Fixers vs. External Scalers
Comparing Indivision ECS/AGA Mk3 against GBS-Control, OSSC, and RetroTINK 2X/5X/4K.
Indivision ECS V2/V3 & Indivision AGA MK3
- Indivision ECS V2 / V3 (A500/A2000/A3000): Plugs into the DIP-48 Denise socket and actually emulates a full ECS Super Denise in FPGA! Includes a full frame-buffer deinterlacer (flicker fixer) for 640×512 High-Res Laced Workbench screens.
- Indivision AGA MK3 (A1200 / A4000T): Clips over Lisa (U4) AND CIA-A (U7) to capture full 24-bit AGA colour, audio (for HDMI embedding!), and live keyboard/mouse shortcuts for on-the-fly screen centering and V-Sync locking.
External Scalers: GBS-Control, OSSC & RetroTINK
- GBS-Control (Modded GBS-8200 + ESP8266): The ultimate budget (~£45) Workbench scaler! Its motion-adaptive deinterlacer handles Amiga 480i/576i interlaced screens and instant 240p↔480i resolution switches with zero sync dropout.
- OSSC (Open Source Scan Converter): Line-multiplies DB23 analog RGBS up to 5× (1080p) with zero frame lag. Uses bob-deinterlacing on Hi-Res Laced modes (slight vertical shimmer) and brief resync blackouts when switching screenmodes.
- RetroTINK 5X-Pro / 4K: Frame-locked motion-adaptive deinterlacing, CRT mask emulation, and seamless resolution switching from a single DB23-to-SCART cable across all consoles/computers.
- DB23 Cable Safety: Always use a genuine DB23 (or neatly cut DB25) wired to Analog RGB (Pins 3, 4, 5) with 75 Ω termination and a 470 Ω series resistor on Pin 10 (
/CSYNC) so TTL 5V sync does not overdrive 75 Ω video inputs. View DB23 Pinout →
Amiga Video Upgrade Comparison Matrix
| Solution | Signal Path | 24-Bit AGA Support | Hi-Res Interlace (576i) | Input Lag | Best For |
|---|---|---|---|---|---|
| RGBtoHDMI (Pi Zero) | 12-bit Digital (Denise) | OCS/ECS 12-bit native | Frame-buffered / Bob | < 3 ms | A500 / A500+ / A600 / A2000 |
| Indivision ECS V2/V3 | FPGA ECS Denise replacement | OCS/ECS only | Full Flicker-Fixer buffer | ~1 frame (or VSync) | A500 / A2000 / A3000 |
| Indivision AGA MK3 | 24-bit Digital (Lisa clip) | Full 24-bit AGA + Audio | Full Flicker-Fixer buffer | Sub-frame VSync | A1200 / A4000T |
| GBS-Control | DB23 Analog RGBS | Full 24-bit Analog | Motion-Adaptive (Zero drop) | ~1 frame | All Amigas (Best budget Laced) |
| OSSC / RetroTINK 5X | DB23 Analog RGBS SCART | Full 24-bit Analog | Bob (OSSC) / Motion (RT5X) | 0–1 frame | Multi-system RGB setups |