Amiga Modern Upgrades Hub

Interactive upgrade compatibility finder & 5 deep-dive workbench guides: Accelerators, Storage, Video & Upscaling, Memory & Bus, and PSU Modernization.

Interactive Amiga Upgrade Compatibility & PSU Finder

Select your Amiga model to view verified CPU accelerators, solid-state storage paths, HDMI/RGB video options, RAM expansions, and +5 V PSU current budgets.

Amiga 500 & A500+ — Recommended Upgrade Path

Stock +5V Draw: ~1.8A · Upgraded Target PSU: 4.0A+ (Mean Well RT-50B / CA-PSU)

CPU Accelerator

Classic / Open-Source: TerribleFire TF536 (50MHz 030 + 64MB + IDE), ACA500plus (side slot, dual CF + KS switcher), or PiStorm (DIP-64 socket + Pi 3A+/Zero 2W running Emu68 JIT + HDMI RTG).

Mass Storage & Floppy

Floppy: Gotek + FlashFloppy (S0 jumper = DF0:, OLED + rotary mod, or CIA-A DF0/DF1 switcher). HDD: TF536 44-pin IDE (ehide.device), ACA500plus CF slots, or PiStorm microSD.

Video & HDMI

Internal Digital: RGBtoHDMI DIP-48 Denise CPLD interposer + Pi Zero (<3ms lag, zero jailbars) or Indivision ECS V2/V3 flicker fixer. External: DB23 RGBS to GBS-Control / OSSC / RetroTINK.

Memory & RTC

Upgrade Rev 6A to 1MB Chip RAM (8372A Agnus + JP2/JP7A mod) or A500+ to 2MB Chip RAM; add 4–64MB true Fast RAM via ACA500plus/TF536/PiStorm for WHDLoad PRELOAD.

5 Deep-Dive Hardware Upgrade Modules

Each module has a dedicated reference guide with jumper tables, software drivers, and step-by-step installation procedures.

Module 01 · CPU & RTG

1. Accelerator Cards Guide →

Classic Motorola 68k cards vs. modern open-source FPGA/CPLD & ARM JIT accelerators.

  • Classic Motorola: 68020, 68030 (Phase5 Blizzard 1230 Mk IV), 68040 (A3640 rev 3.2 recap), and 68060 (Phase5 Blizzard/CyberStorm & Apollo 1260 Rev 6 at 50–80 MHz with 3.3V regulator & 68060.library).
  • TerribleFire: TF536 (A500/A2000 030+64MB), TF1230, and TF1260 (060+128MB) — loading ehide.device via LoadModule or custom Kickstart 3.2 ROM.
  • Furia 600 & ACA Series: Furia EC020 33 MHz + FPU (4MB PCMCIA toggle), ACA500plus, ACA620, ACA1221lc, ACA1233n & ACA1234.
  • PiStorm & PiStorm32-Lite: Bare-metal Emu68 JIT vs Linux Musashi on Raspberry Pi 3A+, 4B, and Zero 2W with VideoCore P96 HDMI RTG.

Open Accelerators Deep-Dive →

Module 02 · Solid-State & Floppy

2. Modern Storage Solutions →

Gotek FlashFloppy configurations, 44-pin IDE-to-SD/CF/mSATA, and PCMCIA transfer kits.

  • Gotek + FlashFloppy: Jumpering S0 for internal DF0: vs S1 for external DF1:, CIA-A boot selector switches, FF.CFG parameters, 0.91″/0.96″ I2C OLED displays, EC11 rotary encoders, and piezo track-click mods.
  • 44-Pin IDE-to-SD / CF / mSATA: A600/A1200 Gayle IDE header Pin 1 orientation (+5V on pins 41/42), removing E123C/E125C timing caps, MaxTransfer = 0x1FE00 in HDToolBox, and PFS3-AIO vs FFS TD64 for >4 GB drives.
  • PCMCIA Transfer Kits: 68-pin Type II CompactFlash adapter setup using compactflash.device, L:fat95, and DEVS:DOSDrivers/CF0 + Kickstart 3.1 CardReset fix.

Open Storage Deep-Dive →

Module 03 · 15kHz RGB & HDMI

3. Video Output & Upscaling →

Internal digital socket adapters and flicker fixers vs. external RGBS scan converters.

  • RGBtoHDMI: Denise DIP-48 CPLD socket interposer (and Super Denise 8373 extended adapter / A600 PLCC clip) with Raspberry Pi Zero for sub-frame latency pixel-perfect HDMI.
  • Indivision ECS V2/V3 & AGA MK3: Internal FPGA scan-doublers and full frame-buffer flicker fixers for 640×512 Hi-Res Laced Workbench screens (plus 24-bit Lisa capture on A1200/A4000T).
  • External Scalers: GBS-Control (motion-adaptive deinterlacing with zero resolution-switch drop), OSSC, and RetroTINK 5X/4K via buffered DB23 RGB SCART cables.

Open Video & Upscaling Deep-Dive →

Module 04 · Chip/Fast RAM & Zorro

4. Memory & Bus Expansions →

Bus contention architecture, WHDLoad memory sizing, trapdoor RTC cards, and Zorro II/III.

  • Chip RAM vs. Fast RAM vs. Slow ($C00000) RAM: How Agnus/Alice DMA steals even/odd bus cycles on Chip and Slow RAM, and why true Fast RAM doubles A1200 CPU speed immediately.
  • WHDLoad Requirements: Why 1 MB Chip + 4–8 MB Fast RAM (OCS/ECS) or 2 MB Chip + 8–16 MB Fast RAM (AGA) is needed for PRELOAD and soft-kicked ROMs.
  • Trapdoor + RTC & Big-Box Zorro II/III: A500/A600/A1200 trapdoor expansions with CR2032 RTC modules, the 4 MB vs 8 MB PCMCIA address conflict, and A2000/A3000/A4000 Zorro II/III Autoconfig + Buster Rev 11 DMA rules.

Open Memory & Bus Deep-Dive →

Module 05 · Power & Safety

5. PSU & Power Modernization →

Protecting custom silicon from aging Commodore bricks, ripple, and cable voltage drop.

  • Vintage PSU Risks: High +5 V ripple (>100 mVpp), DIN cable voltage droop under accelerator load, and missing −12 V rails (distorted LF347 op-amp audio).
  • Mean Well RT-50B / RT-65B Conversions: Complete 5-pin Square DIN wiring table (+5V Pin 1, Shield Pin 2, +12V Pin 3, GND Pin 4, −12V Pin 5), cross-regulation load caveats, and trimming +5 V under load.
  • Modern Bricks & Big-Box ATX: CA-PSU / Keelog / Electroware replacements, plus the A2000/A3000/A4000 50/60 Hz TICK vs VSYNC jumper (J300/J351/J213) for ATX supplies.

Open PSU & Power Deep-Dive →

Theme Palette

Default Dark
High-contrast dark
Amber Terminal
Monochrome amber
Matrix CRT
Phosphor green
Workbench Light
Clean light mode

Audio & Display

Relay Click Sounds Web Audio API — soft mechanical clicks
CRT Scanline & Flicker Pure CSS overlay effect

System Info

Customization Panel Theme preference, audio FX, and CRT overlay settings are saved to your browser's localStorage and persist between visits. No cookies or server-side storage is used.
Keyboard Shortcuts Press Esc to close this panel. Use the header moon/sun icon to cycle themes.