Amiga Kickstart & Workbench ROM Hub

Interactive ROM Revision, CRC32 & EPROM Planner + 5 deep-dive guides: Version Matrix & Hashes, EPROM Burning, Switchers & Softkicking, WHDLoad Setup, and DiagROM.

Interactive Kickstart ROM Inspector & EPROM Burner Planner

Select a Kickstart revision (or DiagROM) to view its official CRC32/MD5 hash, IDE/Chip-RAM capabilities, WHDLoad DEVS:Kickstarts filename, and exact 27C400/27C800 burning steps.

Kickstart 1.3 (Rev 34.005) — A500 / A2000 / CDTV

Size: 256 KB (262,144 B) · Part: 315093-02 · CRC32: C4F0F55F

Checksums & Hardware Support

CRC32: C4F0F55F · MD5: 82a21c1890cae844b3df741f2762d48d. Supports 512KB/1MB Chip RAM and expansion-ROM autoboot (A590/GVP), but has no built-in FFS or A600 Gayle IDE driver.

27C400 / 27C800 EPROM Burning

Single 16-bit U6 Socket: Double the 256KB file to 512KB (copy /b kick13.rom+kick13.rom), apply 16-bit Byte-Swap (11 11 4E F9 → 11 11 F9 4E), and burn to 27C400 (leave Pins 1 & 42 empty on 42-pin sockets; Rev 3/5 needs Pin 1/31 adapter).

WHDLoad DEVS:Kickstarts/

Save unswapped 262,144-byte image as DEVS:Kickstarts/kick34005.A500 alongside kick34005.A500.RTB from skick346.lha (required by >70% of OCS WHDLoad slaves).

Switcher & Softkick Options

Place in lower 512KB bank (A18=GND) of a 27C800 dual-ROM switcher alongside KS 3.1/3.2, or softkick from KS 2.0/3.x using Relokick 1.4a, SKick, or BlizKick.

Kickstart 1.0 – 3.2.2 Quick Reference Matrix

See the Full Version & Hash Matrix for complete MD5 checksums and Commodore mask part numbers.

VersionRev IDSizeTarget ModelsMax Chip RAMIDE / Large HDD SupportOfficial CRC32
1.0 / 1.130.x / 31.034256 KBA1000 (WCS floppy)512 KBNo autobootEC86DAE2
1.233.180256 KBA500 / A2000512 KB / 1 MBNo FFS / No IDEA6CE1636
1.334.005256 KBA500 / A2000 / CDTV512 KB / 1 MBAutoboot via expansion ROMC4F0F55F
2.0437.175512 KBA500+ / A2000 / A30002 MB (ECS)No Gayle IDE (A3000 SCSI ok)C3BDB240
2.0537.299512 KBEarly A6002 MB (ECS)NO IDE / Broken PCMCIA!83028FB5
2.0537.300512 KBA600 / A600HD2 MB (ECS)IDE works, 40 MB cap bug!64466C2A
2.0537.350512 KBLate A600HD2 MB (ECS)Fixes 40 MB bug (4 GB FFS)43B0DF7B
3.039.106512 KBEarly A1200 / A40002 MB (AGA)4 GB FFS (or PFS3-AIO)6C9B07D2
3.140.063 / 40.068512 KBA500/600/2000 / A1200 / A40002 MB4 GB FFS (>4GB with PFS3-AIO)FC24AE0D / 1483A091
3.1.4 / 3.2.246.143 / 47.111512 KB+All Amigas (Hyperion)2 MBNative >4 GB NSD/TD64 + 060/PCMCIA fixCommercial ROM

5 Deep-Dive Kickstart & ROM Engineering Guides

Explore every aspect of Amiga ROM hardware, EPROM programming, softkicking, WHDLoad preparation, and diagnostic ROMs.

Module 01 · Revisions & Checksums

1. Kickstart Version Matrix & Hashes →

  • Full revision breakdown from Kickstart 1.0 to 3.2.2 (`33.180`, `34.005`, `37.175`, `37.299`, `37.300`, `37.350`, `39.106`, `40.063`, `40.068`, `46.143`, `47.111`).
  • A600 Kickstart 2.05 Deep-Dive: Why `37.299` ignores the internal IDE header, why `37.300` struggles above 40 MB, and why `37.350` (or `40.063` / `47.111`) is essential.
  • Official unswapped CRC32 and MD5 hashes + Commodore mask ROM part numbers (`315093-02`, `391773-01`/`391774-01`).

Open Version & Hash Matrix →

Module 02 · 27C400/800/160/322

2. EPROM Burning & Pinout Guide →

  • 16-Bit vs 32-Bit Architecture: Single 40/42-pin DIP (U6 on A500/A600/A2000) vs dual 42-pin HI/LO 16-bit word-interleaved sockets (U6A/U6B on A1200, U176/U175 on A4000).
  • A500 Rev 3 / Rev 5 Pin 1 & 31 Trap: Why plugging a 27C400 straight into a Rev 5 socket causes a red/black screen, and how to jumper Pin 1 (`A17`) → 31 and Pin 31 (`_BYTE`) → 21 (`+5V`).
  • TL866II Plus / XGecu T48 Workflow: 16-bit Big-Endian ↔ Little-Endian byte-swapping (`11 14` → `14 11`), doubling 256 KB images, and 27C322 adapter requirements.

Open EPROM Burning Guide →

Module 03 · Hardware & MapROM

3. Multi-ROM Switchers & Softkicking →

  • Physical Multi-ROM Switchers: Building dual/quad switchers with 27C800 / 27C160 / 27C322 EPROMs, 10 kΩ pull-up resistors on `A18`/`A19`, and no-drill keyboard reset (`_KRES` / `_KBRESET`) triggers.
  • Software Kickstart Loaders: Configuring Relokick 1.4a, SKick 3.46, BlizKick (Phase5 MapROM + module injection), and ACAtune -maprom.
  • PiStorm Emu68 Mapping: Zero-hardware ROM switching via initramfs kick.rom in the microSD config.txt.

Open Switchers & Softkicking →

Module 04 · DEVS:Kickstarts & .RTB

4. WHDLoad & Kickstart Preparation →

  • Dumping Physical ROMs: Using TransROM >CF0:kick.rom or GrabKick on a real Amiga, plus using licensed Amiga Forever ROMs + rom.key.
  • Exact DEVS:Kickstarts/ Table: Mandatory filenames (kick33180.A500, kick34005.A500, kick37175.A500, kick40068.A1200, kick40068.A4000) and matching .RTB relocation tables from skick346.lha.
  • Why renaming an A1200 `40.068` ROM to `kick40068.A4000` fails checksum validation.

Open WHDLoad ROM Guide →

Module 05 · Low-Level Diagnostics

5. DiagROM & Amiga Test Kit Integration →

  • DiagROM in the Kickstart Socket: How DiagROM runs entirely in 680x0 registers without working Chip RAM to diagnose dead, black-screen, or green-screen motherboards.
  • 9600-8N1 RS-232 Serial Output: Reading live Chip/Fast RAM bit-fault masks over a DB25 null-modem cable and mapping bad data bits (`D0–D15`) to specific DRAM ICs (`U16–U19`).
  • Amiga Test Kit (ATK) Dual-ROM Builds: Combining DiagROM and ATK on a single 27C800 for complete bench bring-up and floppy/CIA/audio soak testing.

Open DiagROM & ATK Guide →

Theme Palette

Default Dark
High-contrast dark
Amber Terminal
Monochrome amber
Matrix CRT
Phosphor green
Workbench Light
Clean light mode

Audio & Display

Relay Click Sounds Web Audio API — soft mechanical clicks
CRT Scanline & Flicker Pure CSS overlay effect

System Info

Customization Panel Theme preference, audio FX, and CRT overlay settings are saved to your browser's localStorage and persist between visits. No cookies or server-side storage is used.
Keyboard Shortcuts Press Esc to close this panel. Use the header moon/sun icon to cycle themes.