Amiga Memory & Bus Expansions
Chip RAM vs. Fast RAM architecture, WHDLoad memory requirements, trapdoor + RTC expansions, and Big-Box Zorro II/III buses.
1. Chip RAM vs. Fast RAM vs. Slow ("Ranger") RAM
Why adding true Fast RAM immediately speeds up a stock 7 MHz 68000 or 14 MHz 68EC020 without changing the clock.
Chip RAM ($000000–$1FFFFF) — Shared Custom Bus
- Owned by Agnus / Alice: Chip RAM is the only memory the custom chipset's 25 DMA channels can reach — every bitplane, sprite, Copper list, Blitter surface,Paula audio sample, and floppy MFM buffer must reside in Chip RAM.
- DMA Bus Contention: On even-numbered 280 ns colour-clock slots, Agnus gets priority; if you open a 16-colour High-Res screen or run the Blitter with
BLTPRIset, Agnus steals odd cycles too (asserting/DBRto Gary/Gayle) and stalls the CPU! - Chipset Limits: OCS 8370/8371 = 512 KB; ECS 8372A = 1 MB; ECS 8375 (A500+/A600) & AGA 8374 Alice (A1200/A4000) = 2 MB max.
True Fast RAM vs. Slow ($C00000) Trapdoor RAM
- Slow / "Ranger" RAM ($C00000–$D7FFFF): A standard A501 512 KB trapdoor card on an unmodded A500 sits on the custom chip bus behind Agnus/Gary. Custom chips cannot DMA to it, yet Agnus still stalls the 68000 during heavy video DMA — giving "worst of both worlds" speed.
- True Fast RAM ($200000–$9FFFFF Zorro II, or 32-bit local): Connected directly to the CPU bus outside Agnus's domain. The CPU executes code and reads stacks at full bus speed with zero video DMA wait states (~25–35% real-world speedup on an A500, and >2× speedup on a stock A1200 because the 32-bit 68EC020 escapes 16-bit Chip RAM contention).
2. WHDLoad Memory Requirements & Trapdoor Expansions
How much Chip RAM and Fast RAM you actually need for smooth hard-drive gaming.
WHDLoad Memory Tiers & PRELOAD
- Minimum Boot (512 KB Chip + 512 KB Slow/Fast): Only boots single-disk OCS games; multi-disk games must swap the OS in and out of memory on every track load ("OS flashing").
- OCS/ECS Recommended (1 MB Chip + 4–8 MB Fast): Runs 99% of A500/A600 WHDLoad slaves with full
PRELOAD(caching all disk images in Fast RAM for zero-wait loading) and instantQuitKeyreturn to Workbench. - AGA / CD32 Recommended (2 MB Chip + 8–16 MB+ Fast): Essential for multi-disk AGA titles (Beneath a Steel Sky, Slam Tilt, Banshee) and Kickstart soft-kicking (
DEVS:Kickstarts/).
Trapdoor Cards & Real-Time Clock (RTC) Modules
- A500 / A500+ Trapdoor (56-pin): Modern replacements (PeteAU 512K/2MB with Gary adapter, Boobip, ICRAM500) replace leaking Varta A501s with coin-cell CR2032 RTCs (OKI MSM6242B or Ricoh RP5C01) and optional 1 MB/2 MB Chip RAM remapping.
- A600 Trapdoor (40-pin): Stock A600 has 1 MB Chip RAM; adding an A601 / A604n / 1 MB trapdoor card brings it straight to the full 2 MB ECS Chip RAM ceiling + clockport headers.
- A1200 Trapdoor (150-pin CPU Edge): Accepts 4 MB/8 MB Fast RAM cards (with FPU socket & RTC) or full CPU accelerators. Remember: switch 8 MB cards to 4 MB mode when using a PCMCIA CF/network adapter!
3. Big-Box Zorro II / Zorro III Bus & Super Buster
A2000, A3000, and A4000 Autoconfig expansion architecture — see the Big-Box Amiga Hub for full pinouts.
| Bus Standard | Machines | Address / Data Width | Autoconfig Window | Key Hardware Notes |
|---|---|---|---|---|
| Zorro II (100-pin) | A2000 (5 slots), A500 side | 24-bit Addr / 16-bit Data | 8 MB RAM ($200000–$9FFFFF) + I/O ($E80000) | Shared 8 MB limit between Zorro II RAM cards and bridgeboards/RTG frames. |
| Zorro III (100-pin) | A3000 (4 slots), A4000 (4 slots) | 32-bit Multiplexed Addr/Data | $10000000–$7FFFFFFF (~1.75 GB space) | Backward-compatible with Zorro II cards; requires Super Buster Rev 11 (390539-11) for reliable Zorro III DMA (Rev 09 freezes with Fastlane Z3 / Deneb). |