CSG Lisa Pinout — Amiga 1200/4000 AGA Display Controller (PLCC-84)

PLCC-84 · Sound & Video · CSG 4203 Lisa (391227-01) — PLCC-84

CSG Lisa (AGA Display Controller) (PLCC-84) — Printable IC Pinout & Signal SheetHigh-contrast DIP/PLCC pinout diagram, supply pin highlights (+5V/GND/+12V), and full 84-pin table.

Pinout diagram

Used in Retro Machine Hubs

Click any system badge below to jump directly to its dedicated repair, schematic, and diagnostic Machine Hub:

Summary specifications

Technology VLSI CMOS
Operating Voltage +5 V (VDD0 pin 30, VDD1 pin 56, VDD2 pin 83; VSS pins 1, 33, 53)
Video Out 24-bit digital RGB (R0-7/G0-7/B0-7) to DAC + SOG sync-on-green
Clocks CCK in (pin 10), SCLK + C14O + C28M out — Alice syncs from Lisa's 14 MHz/SCLK
Chip RAM Fetch 32-bit D0-D31 bus, Fast Page Mode, /CAS + /BURST
Registers RGA1-RGA8 written by Alice/CPU at $DFFxxx (BPLCONx, CLX, DIW, FMODE)

Full pin reference

Pin Name Group Direction Levels Description Expected Signal
1 VSS0 Ground Power 0 V Ground.
2 D6 Data Bus Bidirectional TTL Chip RAM fetch data bit 6.
3 D5 Data Bus Bidirectional TTL Chip RAM fetch data bit 5.
4 D4 Data Bus Bidirectional TTL Chip RAM fetch data bit 4.
5 D3 Data Bus Bidirectional TTL Chip RAM fetch data bit 3.
6 D2 Data Bus Bidirectional TTL Chip RAM fetch data bit 2.
7 D1 Data Bus Bidirectional TTL Chip RAM fetch data bit 1.
8 D0 Data Bus Bidirectional TTL Chip RAM fetch data bit 0 (LSB).
9 /CAS Control Bidirectional TTL, active low Chip RAM column address strobe (with Alice).
10 CCK Clock / Timing Input TTL 3.55 MHz Colour clock input.
11 WIDE Control Bidirectional TTL Wide 32-bit fetch mode flag — doubled Chip RAM bandwidth.
12 RGA8 Address Bus Input TTL Register address bus bit 8 from Alice.
13 RGA7 Address Bus Input TTL Register address bus bit 7.
14 RGA6 Address Bus Input TTL Register address bus bit 6.
15 RGA5 Address Bus Input TTL Register address bus bit 5.
16 RGA4 Address Bus Input TTL Register address bus bit 4.
17 RGA3 Address Bus Input TTL Register address bus bit 3.
18 RGA2 Address Bus Input TTL Register address bus bit 2.
19 RGA1 Address Bus Input TTL Register address bus bit 1 (LSB).
20 MDAT I/O Bidirectional TTL Mouse/joystick serial data (quadrature counter port).
21 /MLD I/O Bidirectional TTL, active low Mouse/joystick serial load/latch.
22 SCLK Clock / Timing Output TTL Serial clock out — synchronises Alice's clock generator.
23 C14O Clock / Timing Output TTL 14 MHz 14 MHz clock output feeding Alice (pin 36).
24 /RST Control Input TTL, active low Reset — clears all ECS/AGA-added registers (BPLCON3/4, DIWHIGH, FMODE).
25 C28M Clock / Timing Input TTL 28 MHz 28 MHz master clock input for HIRES/SHRES pixel definition.
26 SOG Analog Output Video Sync-on-green composite sync to the video DAC.
27 BLANK Control Output TTL Blanking output to DAC.
28 ZD Analog Output Analog ZD analog reference to the DAC resistor network.
29 B0 Data Bus Output TTL Blue video data bit 0 (LSB).
30 VDD0 Power Power +5 V +5 V supply.
31 B1 Data Bus Output TTL Blue video data bit 1.
32 B2 Data Bus Output TTL Blue video data bit 2.
33 VSS1 Ground Power 0 V Ground.
34 B3 Data Bus Output TTL Blue video data bit 3.
35 B4 Data Bus Output TTL Blue video data bit 4.
36 B5 Data Bus Output TTL Blue video data bit 5.
37 B6 Data Bus Output TTL Blue video data bit 6.
38 B7 Data Bus Output TTL Blue video data bit 7 (MSB).
39 G0 Data Bus Output TTL Green video data bit 0 (LSB).
40 G1 Data Bus Output TTL Green video data bit 1.
41 G2 Data Bus Output TTL Green video data bit 2.
42 G3 Data Bus Output TTL Green video data bit 3.
43 C28Out Clock / Timing Output TTL 28 MHz 28 MHz clock output to board.
44 G4 Data Bus Output TTL Green video data bit 4.
45 G5 Data Bus Output TTL Green video data bit 5.
46 G6 Data Bus Output TTL Green video data bit 6.
47 G7 Data Bus Output TTL Green video data bit 7 (MSB).
48 R0 Data Bus Output TTL Red video data bit 0 (LSB).
49 R1 Data Bus Output TTL Red video data bit 1.
50 R2 Data Bus Output TTL Red video data bit 2.
51 R3 Data Bus Output TTL Red video data bit 3.
52 R4 Data Bus Output TTL Red video data bit 4.
53 VSS2 Ground Power 0 V Ground.
54 R5 Data Bus Output TTL Red video data bit 5.
55 R6 Data Bus Output TTL Red video data bit 6.
56 VDD1 Power Power +5 V +5 V supply.
57 R7 Data Bus Output TTL Red video data bit 7 (MSB).
58 /BURST Control Bidirectional TTL, active low Burst-mode fetch enable for 64-bit plane/sprite shifters.
59 D31 Data Bus Bidirectional TTL Chip RAM fetch data bit 31 (MSB of 32-bit wide word).
60 D30 Data Bus Bidirectional TTL Chip RAM fetch data bit 30.
61 D29 Data Bus Bidirectional TTL Chip RAM fetch data bit 29.
62 D28 Data Bus Bidirectional TTL Chip RAM fetch data bit 28.
63 D27 Data Bus Bidirectional TTL Chip RAM fetch data bit 27.
64 D26 Data Bus Bidirectional TTL Chip RAM fetch data bit 26.
65 D25 Data Bus Bidirectional TTL Chip RAM fetch data bit 25.
66 D24 Data Bus Bidirectional TTL Chip RAM fetch data bit 24.
67 D23 Data Bus Bidirectional TTL Chip RAM fetch data bit 23.
68 D22 Data Bus Bidirectional TTL Chip RAM fetch data bit 22.
69 D21 Data Bus Bidirectional TTL Chip RAM fetch data bit 21.
70 D20 Data Bus Bidirectional TTL Chip RAM fetch data bit 20.
71 D19 Data Bus Bidirectional TTL Chip RAM fetch data bit 19.
72 D18 Data Bus Bidirectional TTL Chip RAM fetch data bit 18.
73 D17 Data Bus Bidirectional TTL Chip RAM fetch data bit 17.
74 D16 Data Bus Bidirectional TTL Chip RAM fetch data bit 16.
75 D15 Data Bus Bidirectional TTL Chip RAM fetch data bit 15.
76 D14 Data Bus Bidirectional TTL Chip RAM fetch data bit 14.
77 D13 Data Bus Bidirectional TTL Chip RAM fetch data bit 13.
78 D12 Data Bus Bidirectional TTL Chip RAM fetch data bit 12.
79 D11 Data Bus Bidirectional TTL Chip RAM fetch data bit 11.
80 D10 Data Bus Bidirectional TTL Chip RAM fetch data bit 10.
81 D9 Data Bus Bidirectional TTL Chip RAM fetch data bit 9.
82 D8 Data Bus Bidirectional TTL Chip RAM fetch data bit 8.
83 VDD2 Power Power +5 V +5 V supply.
84 D7 Data Bus Bidirectional TTL Chip RAM fetch data bit 7.

Common uses and repair diagnostics

Lisa (CSG 4203, part 391227-01) is the AGA display controller replacing Denise — it serializes up to 8 bitplanes plus sprites from a 32-bit Chip RAM fetch, drives a 256-colour 24-bit palette (16.8 million colours, HAM8), and emits the full digital video bus (R0-7/G0-7/B0-7) to the external DAC on the A1200, A4000 and CD32. Lisa also keeps Denise's quadrature mouse/joystick counters (MDAT//MLD) and generates SCLK and the 14 MHz clock that synchronises Alice.

U4 on the Amiga 1200, U450 on the A4000/A4000T, U4 on the CD32. Because Lisa generates the SCLK/14 MHz clocks Alice needs, a dead Lisa takes the whole AGA chipset down — check the R/G/B digital outputs at the DAC before swapping the display chip.

  • Black screen on an A1200/A4000 with a running CPU: verify C28M (pin 25) has a 28 MHz clock and that SCLK/C14O (pins 22/23) are toggling — without them Alice never runs.
  • Single-colour or missing-channel video: continuity-check the R0-7/G0-7/B0-7 ladder to the DAC resistor network; electrolyte corrodes the fine traces around Lisa first.
  • Mouse moving on one axis only points at the MDAT//MLD quadrature port (pins 20-21) or the CIA line feeding it — rarely Lisa itself.
  • Garbled HAM/AGA modes with stable lores: suspect FMODE register writes on the RGA bus — confirm RGA1-RGA8 (pins 12-19) continuity to Alice.

Datasheets and references

Related chips

Theme Palette

Default Dark
High-contrast dark
Amber Terminal
Monochrome amber
Matrix CRT
Phosphor green
Workbench Light
Clean light mode

Audio & Display

Relay Click Sounds Web Audio API — soft mechanical clicks
CRT Scanline & Flicker Pure CSS overlay effect

System Info

Customization Panel Theme preference, audio FX, and CRT overlay settings are saved to your browser's localStorage and persist between visits. No cookies or server-side storage is used.
Keyboard Shortcuts Press Esc to close this panel. Use the header moon/sun icon to cycle themes.